Engine
PLEASE NOTE : If you want to change the order of the results, just click on the column heading, i.e. click on "Name" to view the products in alphabetical order by product name.
There are 347 parts in this category.
| Code | Name | Price | |
| 14.0208 | AUTO ADVANCE FIXING BOLT BOLT 1/4" UNF X 2.5" UNDER HEAD LONG | £1.00 | |
| 14.0230 | CRANKCASE BOLT LONG T120/T140 1971on (5/16"unf X 5") | £1.25 | |
| 14.0252 | BOLT 3/8" unf X 3" FRONT ENGINE PLATES TO FRAME 1970 T120 | £2.75 | |
| 14.0254 | FRONT ENGINE BOLT OIL IN FRAME TWINS & T150 | £1.75 | |
| 14.0301 | NUT 1/4" UNF | £0.75 | |
| 14.0702 | 5/16" UNF THIN LOCK NUT | £1.50 | |
| 14.1301 | 1/4" UNF SELF-LOCKING NUT | £1.00 | Image |
| 14.1401 | STUD 1/4" unc X 1/4" unf | £1.50 | |
| 14.6608 | POSI HEADED SCREW 1/4"unc X 1" LONG | £1.00 | |
| 14.6610 | POSI HEADED SCREW 1/4"unc X 1.5" LONG | £1.45 | |
| 17844/AE | PISTON ASSEMBLY (PAIR) 650cc 9:1 STD GENUINE AE | £150.00 | Image |
| 17844/AE20 | PISTON ASSEMBLY (PAIR) 650cc 9:1 +.020" O/S GENUINE AE | £150.00 | Image |
| 17844/AE40 | PISTON ASSEMBLY (PAIR) 650cc 9:1 +.040" O/S GENUINE AE | £150.00 | Image |
| 17844/AE60 | PISTON ASSEMBLY 650cc (PAIR) 9:1 +.060" O/S GENUINE AE | £150.00 | Image |
| 21.0669 | FRONT CRANKCASE 5/16" STUD FOR EX PIPE STAYS 1968on | £4.00 | |
| 21.0692 | CYLINDER BASE NUT (12 POINT) 3/8" unf 1969 on | £1.30 | Image |
| 21.0692CEI | CYLINDER BASE NUT (12 POINT) 3/8" 26tpi CYCLE THREAD | £2.00 | |
| 21.1823 | CRANKCASE BOLT 1971on 5/16" X 3 3/4" (ALSO TANK ON 1971/2 WITH SEAM) | £2.00 | |
| 21.1864 | OIL PUMP FIXING STUD 1/4" UNC/UNF 1969on | £1.50 | |
| 21.1865 | CYLINDER BASE STUD 3/8" UNC/UNF 1968 ON | £2.00 | |
| 21.1866 | ALTERNATOR STATOR MOUNTING STUD LONG 1969-73 UNC/UNF | £8.00 | |
| 21.1867 | ALTERNATOR STATOR MOUNTING STUD SHORT 1969-73 UNC/UNF | £8.00 | |
| 21.1871 | BLANKING PLUG (L/H THREAD) WHEN REMOVING TACHO DRIVE 1970on | £3.50 | |
| 21.1872 | BLANKING PLUG (FOR TDC HOLE unc THREAD) 1969on | £3.50 | |
| 21.1873 | CRANKCASE MOUTH INTERNAL SCREW (u.n.c THREAD) 1969on | £2.50 | |
| 21.1875 | ROCKER BOX CORNER BOLT 1/4" unc 1969on | £1.25 | |
| 21.1876 | INLET MANIFOLD TO CYL HEAD STUD 1/4" UNC/UNF TR6/TR7 | £2.00 | |
| 21.1877 | NUT 1/4" u.n.f. (SMALL HEADED) TR7 MANIFOLD TO HEAD | £0.75 | |
| 21.1906 | OIL PUMP NUT 1/4" UNF 1969 ONWARDS (CONICAL SEATING) | £1.50 | |
| 21.1908 | NUT OIL JUNCTION BLOCK 1970 ONWARDS | £1.00 | |
| 21.1996 | TR6/TR7 CARB TO MANIFOLD SHOULDERED STUD 1969on | £2.25 | |
| 21.2112 | BOTTOM ENGINE MOUNTING STUD 1971 ONWARDS | £10.00 | |
| 21.2182 | CRANKSHAFT ALTERNATOR ROTOR NUT 1973on | £2.50 | |
| 21.2183 | CRANKSHAFT ALTERNATOR ROTOR STUD 1973on | £2.50 | |
| 37.0103 | NUT 1/4" X 26tpi (SMALL HEADED) | £1.00 | |
| 57.0989 | HOLLOW DOWEL 1/4" INSIDE DIAMETER | £2.50 | |
| 57.1553 | SCREW,1/4x26x3/8 CEI/BSF,PANHD (UNIT 650 R/BOX CLIP & SLICKSHIFT G/BOX COVER) | £1.00 | |
| 57.1979 | FELT WASHER FOR MAINSHAFT (BY G/BOX SPROCKET) | £0.75 | |
| 57.2166/T | SLOTTED INSPECTION CAP REMOVAL & REFITTING TOOL (STAINLESS STEEL) | £7.50 | Image |
| 57.2259 | PRIMARY CHAIN ADJUSTER DRAIN PLUG unc 1969on | £4.50 | Image |
| 57.2440 | CHAINCASE ROTOR INSPECTION COVER 1968on | £17.50 | Image |
| 60.0208-5 | PATENT PLATE HAMMER DRIVE SCREW USE 60.4255 | £0.00 | |
| 60.2133 | OIL PRESSURE SWITCH TAPER THREAD | £8.00 | |
| 60.2363 | BALL BEARING (7/32") (OIL PUMP) S70-7 | £0.40 | |
| 60.3761 | CON ROD BOLT NUT (5/16"UNF) | £1.50 | |
| 60.4167 | MAIN BEARING TIMING SIDE BALL RACE ENGINE No GE27029on | £20.00 | |
| 60.4245 | WASHER 1/4" dia (THICK) | £0.30 | |
| 60.4255 | PATENT PLATE HAMMER DRIVE SCREW | £0.50 | |
| 60.7362 | MAIN BEARING TIMING SIDE ROLLER CONVERSION 1972 ONWARDS | £48.50 | |
| 70.0327 | CYLINDER HEAD BOLT SHORT OUTER | £5.25 | Image |
| 70.0375 | INTERMEDIATE GEAR SPINDLE | £6.75 | Image |
| 70.0400 | INTERMEDIATE GEAR BUSH | £6.00 | Image |
| 70.0402 | DRAIN PLUG FIBRE WASHER 3/8" i.d. | £0.50 | |
| 70.0403 | OIL PUMP SPRING (ALL TWINS) | £1.00 | |
| 70.0470 | TAPPET ADJUSTER NUT cei THREAD | £1.00 | |
| 70.0495 | OIL PUMP PLUNGER SLIDER BLOCK (ALLOY) | £6.25 | Image |
| 70.1330 | ROCKER SPINDLE THRUST WASHER 3/8" dia | £0.75 | Image |
| 70.1335 | COPPER WASHER 3/8" dia | £0.75 | |
| 70.1435 | CHROME DOMED NUT 3/8" 26tpi (CYCLE THREAD) ROCKER SPINDLE etc | £4.00 | |
| 70.1457 | ROCKER ARM (RIGHT EXHAUST or LEFT INLET) USE 71.7044 WITH UNF ADJUSTER | £21.20 | |
| 70.1458 | ROCKER ARM (LEFT EXHAUST or RIGHT INLET) cei THREAD UPTO 1978 | £21.20 | |
| 70.1463 | CAMSHAFT NUT INLET C/W OIL PUMP DRIVE UPTO 1969 | £8.50 | |
| 70.1477 | TAPPET GUIDE BLOCK UPTO 1965 | £22.50 | Image |
| 70.1496 | PUSHROD TUBE BOTTOM SEAL BLACK (UPTO APPROX 1965) | £1.50 | Image |
| 70.1511 | CON ROD SMALL END BUSH | £12.50 | Image |
| 70.1512 | ROCKER SPINDLE (INLET or EXHAUST) | £33.00 | |
| 70.1513 | TAPPET ADJUSTER cei THREAD | £3.50 | |
| 70.1532 | DOWEL 1/4 OD CYLINDER AND HEAD | £2.50 | |
| 70.1543 | VALVE SPRING TOP COLLAR ALL MODELS (NOT 3T) | £6.50 | |
| 70.1544 | VALVE SPRING BOTTOM CUP FLAT TYPE UPTO 1965 | £6.50 | |
| 70.1558 | CAMSHAFT PINION WOODRUFF KEY | £2.00 | |
| 70.1574 | ROCKER SPINDLE THACKERY (SPRING) WASHER 1/2" | £1.50 | Image |
| 70.1575 | ROCKER SPINDLE THRUST WASHER 1/2" dia | £0.75 | Image |
| 70.1580 | CRANKSHAFT PINION WOODRUFF KEY | £2.00 | |
| 70.1591 | CRANKSHAFT MAIN BALL BEARING (1.1/8" dia) RHP MADE IN UK | £39.50 | Image |
| 70.1596 | HEAD BOLT LONG WITH THREADED EXTENSION | £7.50 | |
| 70.1612 | SERRATED WASHER WASHER 1/4" | £0.40 | |
| 70.1670 | FIBRE WASHER PRESSURE RELEASE VALVE TO CRANKCASE | £0.75 | |
| 70.2256 | CAMSHAFT ROTARY BREATHER VALVE SPRING | £5.50 | |
| 70.2412 | CYLINDER BASE NUT 3/8" 26tpi cei SMALL HEX HEAD (ALSO FITS FORK PINCH BOLT) | £1.25 | |
| 70.2441 | COPPER WASHER 1/4" dia | £0.50 | |
| 70.2490 | CONNECTING ROD BIG END BOLT 26 TPI (CYCLE THREAD) | £9.00 | |
| 70.2615 | TIMING COVER OIL WAY PLUG UPTO 1968 | £1.00 | |
| 70.2620 | ENGINE PUSH-ROD ALL 650cc & PRE-UNIT 500cc (ALLOY WITH STEEL END CAPS) | £9.00 | Image |
| 70.2879/C2 | CRANKSHAFT DRIVE SIDE MAIN ROLLER BEARING C2 FIT RHP UK MADE | £69.50 | Image |
| 70.2879/C3 | CRANKSHAFT DRIVE SIDE MAIN ROLLER BEARING C3 FIT RHP UK MADE | £69.50 | |
| 70.2879CN | CRANKSHAFT DRIVE SIDE MAIN ROLLER BEARING CN FIT | £58.00 | |
| 70.2894 | CYLINDER BASE GASKET 650cc TWIN 1950-65 (NO OIL FEED HOLE) | £3.50 | Image |
| 70.2899 | INLET VALVE GUIDE CAST IRON (MADE IN UK) | £10.00 | Image |
| 70.2899/05 | INLET VALVE GUIDE CAST IRON +005" O/SIZE (MADE IN UK) | £10.00 | |
| 70.2899/15 | INLET VALVE GUIDE CAST IRON +015" O/SIZE (MADE IN UK) | £10.00 | |
| 70.2900 | EXHAUST VALVE GUIDE CAST IRON (MADE IN UK) | £10.00 | Image |
| 70.2900/05 | EXHAUST VALVE GUIDE CAST IRON +005" O/SIZE (MADE IN UK) | £10.00 | |
| 70.2900/15 | EXHAUST VALVE GUIDE CAST IRON +015" O/SIZE (MADE IN UK) | £10.00 | |
| 70.2904 | EXHAUST VALVE (1.437 HEAD DIAMETER) | £21.50 | Image |
| 70.2922 | CONNECTING ROD BOLT NUT 26 TPI (CYCLE THREAD) | £3.00 | |
| 70.2962 | INLET MANIFOLD TO CARBURETTER STUD 1957-69 T110/TR6 | £2.00 | |
| 70.2980 | ROCKER BOX STUD 1/4" x 15/16" o.a. (ALLOY HEAD MODELS) | £1.50 | |
| 70.2982 | ROCKER BOX CORNER BOLT ALLOY HEAD (FINE THREAD) | £3.75 | |
| 70.3059 | CAM FOLLOWER STANDARD | £42.50 | |
| 70.3059R | CAM FOLLOWER "R" TYPE | £42.50 | |
| 70.3114 | CRANKSHAFT ALTERNATOR ROTOR STUD | £2.75 | |
| 70.3134 | CAMSHAFT E3134 PROFILE | £67.50 | Image |
| 70.3253 | ROCKER SPINDLE "O" RING | £0.75 | |
| 70.3300 | CRANKSHAFT PINION CLAMPING WASHER | £3.50 | Image |
| 70.3302 | WASHER 1/4" DIA (THIN) UNDER ROCKER BOX | £0.35 | |
| 70.3304 | INLET CARB MANIFOLD 500/650cc 1954 TO 1966 | £44.00 | |
| 70.3310 | INLET VALVE 1.5" dia Pre UNIT TR6,T110, T120 & UNIT 6T,TR6 upto 1965 | £15.00 | |
| 70.3523 | BARREL STUD AT DOWEL UPTO 1968 | £3.50 | |
| 70.3547 | PUSHROD TUBE SEAL (THIN WHITE) | £1.50 | Image |
| 70.3586 | BIG END SHELL'S STD (ENGINE SET FOR 2 RODS) | £22.50 | Image |
| 70.3586/10 | BIG END SHELL'S .010" U/S (ENGINE SET FOR 2 RODS) | £22.50 | Image |
| 70.3586/10/G | BIG END SHELL'S .010" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/20 | BIG END SHELL'S .020" U/S (ENGINE SET FOR 2 RODS) | £22.50 | Image |
| 70.3586/20/G | BIG END SHELL'S .020" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/30 | BIG END SHELL'S .030" U/S (ENGINE SET FOR 2 RODS) | £25.00 | Image |
| 70.3586/30/G | BIG END SHELL'S .030" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/40 | BIG END SHELL'S .040" U/S (ENGINE SET FOR 2 RODS) | £25.00 | Image |
| 70.3586/40/G | BIG END SHELL'S .040" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/G | BIG END SHELL'S STD (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3610 | PISTON ASSEMBLY STD (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.50 | Image |
| 70.3610/20 | PISTON ASSEMBLY +020" (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.00 | Image |
| 70.3610/40 | PISTON ASSEMBLY +040" (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.00 | Image |
| 70.3610/60 | PISTON ASSEMBLY +060" (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.00 | Image |
| 70.3646 | PUSHROD TUBE TR6/T110/T120 ALLOY HEAD 1958-1965 | £22.50 | Image |
| 70.3718 | OIL PUMP STUD 1957/68 350/500 ALSO 1964/68 650 | £2.50 | |
| 70.3732 | OIL PUMP NUT UPTO 1968 cei | £1.50 | |
| 70.3751 | ROCKER BOX CAP FIBRE WASHER | £0.75 | |
| 70.3821 | COUNTERSUNK SCREW FOR G/BOX SPROCKET COVER PLATE | £1.00 | |
| 70.3827 | INLET VALVE GUIDE BRONZE (MADE IN UK) | £12.00 | Image |
| 70.3827/02 | INLET VALVE GUIDE BRONZE +.002" OVERSIZE UK MADE | £12.00 | |
| 70.3827/04 | INLET VALVE GUIDE BRONZE +.004" OVERSIZE | £12.00 | |
| 70.3827/05 | INLET VALVE GUIDE BRONZE +.005" OVERSIZE | £12.00 | |
| 70.3827/06 | INLET VALVE GUIDE BRONZE +.006" OVERSIZE | £12.00 | |
| 70.3827/10 | INLET VALVE GUIDE BRONZE +.010" OVERSIZE | £12.00 | |
| 70.3827/15 | INLET VALVE GUIDE BRONZE +.015" OVERSIZE | £12.00 | |
| 70.3828 | EXHAUST VALVE GUIDE BRONZE (MADE IN UK) | £12.00 | Image |
| 70.3828/02 | EXHAUST VALVE GUIDE BRONZE +.002" OVERSIZE | £12.00 | |
| 70.3828/04 | EXHAUST VALVE GUIDE BRONZE +.004" OVERSIZE | £12.00 | |
| 70.3828/05 | EXHAUST VALVE GUIDE BRONZE +.005" OVERSIZE | £12.00 | |
| 70.3828/06 | EXHAUST VALVE GUIDE BRONZE +.006" OVERSIZE | £12.00 | |
| 70.3828/10 | EXHAUST VALVE GUIDE BRONZE +.010" OVERSIZE | £12.00 | |
| 70.3828/15 | EXHAUST VALVE GUIDE BRONZE +.015" OVERSIZE | £12.00 | |
| 70.3876 | CRANKSHAFT OIL SEAL DRIVE SIDE UP TO 1969 | £2.50 | |
| 70.3887 | OIL PUMP NUT SERRATED WASHER | £0.75 | |
| 70.3903 | CRANKSHAFT OIL SLUDGE TRAP TUBE | £10.50 | Image |
| 70.3905 | CRANKSHAFT OIL TUBE PLUG SLOTTED | £5.50 | |
| 70.3905/M | CRANKSHAFT OIL TUBE PLUG ALLEN TYPE | £5.75 | |
| 70.3907 | CRANKSHAFT FLYWHEEL BOLT (3 REQUIRED) | £9.00 | |
| 70.3927 | EXHAUST VALVE 1.343"dia 1958-63 T110,TR6,T120 & 1963-66 6T ,TR6 | £15.00 | |
| 70.3974 | ROTOR WOODRUFF KEY LONG TYPE | £2.00 | |
| 70.3975 | ALTERNATOR ROTOR TAB WASHER | £2.00 | Image |
| 70.3977 | CRANKSHAFT ALTERNATOR ROTOR NUT | £3.25 | |
| 70.4016 | TIMING COVER PATENT PLATE BADGE | £2.50 | Image |
| 70.4016B | TIMING COVER PATENT PLATE BRASS | £6.50 | |
| 70.4098 | CRANKCASE HALF BOLT T20 1961on | £2.75 | |
| 70.4144 | ALTERNATOR WIRE SEALING GROMMET | £2.00 | Image |
| 70.4147 | PRIMARY CHAIN ADJUSTER FRONT PIN 350/500cc 1961-69 & 650cc 1963-65 | £5.50 | |
| 70.4149 | PRIMARY CHAIN TENSIONER BLADE USE 70.6061 | £0.00 | |
| 70.4154 | PRIMARY CHAINCASE DRAIN PLUG bsf | £2.00 | |
| 70.4535 | STUD 3" CRANKCASE TO GEAR BOX OUTER COVER 1963-68 bsf/cei | £2.50 | |
| 70.4536 | ALTERNATOR STATOR MOUNTING STUD LONG 1963-68 bsf/cei | £7.50 | |
| 70.4537 | ALTERNATOR STATOR MOUNTING STUD SHORT 1963-68 bsf/cei | £8.50 | |
| 70.4547 | CYLINDER HEAD GASKET 9 STUD 650cc SOLID COPPER | £15.00 | |
| 70.4547/80 | HEAD GASKET 9 STUD 650cc SOLID COPPER (.080") THICK | £25.00 | |
| 70.4563 | EXHAUST CAMSHAFT NUT 1963-69 | £5.25 | |
| 70.4564 | CRANKSHAFT HALF TIME PINION 1965-1980 | £35.00 | |
| 70.4565 | CRANKSHAFT 1/2 TIME PINION NUT UPTO 1971 | £6.00 | |
| 70.4568 | OIL SEAL FOR TIMING COVER | £2.50 | |
| 70.4568/UK | OIL SEAL FOR TIMING COVER POINTS & CRANK UNIT TWINS (UK MADE) | £3.50 | |
| 70.4569 | CRANKSHAFT T/COVER OIL SEAL RETAINING CIRCLIP | £1.00 | |
| 70.4573 | ENGINE SPROCKET TO ROTOR SPACER UNIT 650cc | £3.25 | |
| 70.4590 | OIL JUNCTION BLOCK & PIPE ASSEMBLY 1963-65 650cc | £17.50 | Image |
| 70.4603 | INLET VALVE 1.59" dia 1963on T120 & T140 ALSO 1966on TR6 | £15.00 | Image |
| 70.4609 | ROCKER BOX CAP SPRING CLIP 650cc | £2.00 | Image |
| 70.4610 | TAPPET INSPECTION CAP (UNIT ENGINES) | £8.75 | Image |
| 70.4610/T | ROCKER BOX CAP FITTING/REMOVING TOOL (4 LOCATING PEGS) HAS HEX TOP | £15.00 | Image |
| 70.4676 | TAPPET GUIDE BLOCK 1964 TO 1968 (INLET 650cc) | £22.50 | Image |
| 70.4700 | TACHO DRIVE THIMBLE (PRESSES IN END OF EXH CAM) | £6.75 | |
| 70.4704 | PRIMARY CHAIN OIL TUBE | £2.25 | |
| 70.4705 | PRIMARY OIL PIPE CLIP | £3.00 | |
| 70.4706 | BLANKING PLUG BSF | £2.50 | |
| 70.4707 | POINTS WIRE GROMMET | £2.00 | |
| 70.4746 | PUSHROD TUBE SEAL BOTTOM CUP | £2.50 | Image |
| 70.4747 | POINTS COVER PILLAR BOLT | £2.50 | |
| 70.4752 | PUSHROD TUBE SEAL (WHITE) | £1.50 | Image |
| 70.4771 | CYLINDER HEAD BOLT CENTRE 5/16"dia (9 STUD HEADS) | £4.50 | |
| 70.4772 | ALTERNATOR WIRE SLEEVE NUT 1963/64 | £7.50 | Image |
| 70.4922 | PRIMARY CHAIN ADJUSTER DRAIN PLUG (LONG) 1964-65 | £4.00 | |
| 70.5085 | PRIMARY CHAIN TENSIONER BLADE (TRIPLEX CHAIN) | £13.50 | Image |
| 70.5153 | TACHO DRIVE BOX FIXING SCREW R/H THREAD 1966-68 | £9.00 | |
| 70.5157 | REV COUNTER DRIVE GEAR 1966 ONWARDS | £14.75 | Image |
| 70.5230 | CRANKCASE SCAVENGE FILTER & PLUG 1963only | £13.50 | |
| 70.5232 | CRANKCASE MOUTH SCREW UNIT 350/500/650cc UPTO 1968 (bsf) | £2.50 | |
| 70.5315 | CRANKCASE FILTER COPPER WASHER | £3.50 | |
| 70.5316 | CAMSHAFT ROTARY BREATHER VALVE 1963-1969 | £10.50 | Image |
| 70.5349/50 | INLET MANIFIOLDS Pair T120 1963-68 (SCREW IN) cei THREAD | £65.00 | Image |
| 70.5370 | BREATHER VENT PIPE "T" PIECE 1967-69 MODELS | £10.00 | |
| 70.5660 | INLET MANIFOLD TO HEAD GASKET TR6/TR7 | £1.50 | Image |
| 70.5756 | TACHO DRIVE GEARBOX 650cc 1966-68 (R/H THREAD) | £55.00 | Image |
| 70.5861 | TAPPET GUIDE BLOCK EXHAUST 1966 TO 1968 | £22.50 | Image |
| 70.5976 | CHAIN ADJUSTER FRONT PIN 500cc 1969on & 650cc 1966on | £6.50 | |
| 70.6000 | PUSHROD TUBE 6T/TR6/T120 1966 TO 1968 | £20.00 | Image |
| 70.6061 | PRIMARY CHAIN TENSIONER BLADE | £13.50 | Image |
| 70.6159 | INTERMEDIATE WHEEL TIMING GEAR 650/750cc | £35.00 | Image |
| 70.6309 | CYLINDER BASE GASKET 650/750 TWIN 1966on (WITH OIL FEED HOLE) | £3.50 | Image |
| 70.6328 | CRANKSHAFT FLYWHEEL BOLT (3 REQUIRED) 1966-67 | £9.00 | |
| 70.6347 | PRIMARY CHAIN ADJUSTER DRAIN PLUG bsf 1966-68 | £3.50 | |
| 70.6349 | ROCKER OIL FEED PIPE | £45.00 | |
| 70.6387 | CRANKSHAFT TIMING COVER OIL SEAL -.020" UNDERSIZE | £3.20 | |
| 70.6439 | VALVE SPRING BOTTOM CUP DEEP TYPE 1966on | £7.25 | |
| 70.6523 | EXHAUST CAM NUT 1970 ONWARDS | £6.25 | |
| 70.6576 | CON ROD BOLT 650cc UNF | £12.75 | |
| 70.6595 | OIL PRESSURE RELEASE VALVE 75-85lbs | £30.00 | |
| 70.6596 | OIL PRESSURE RELEASE VALVE DOMED CAP | £5.25 | |
| 70.6861 | PISTON GUDGEON PIN (SHORT TYPE) APPROX 54mm LONG | £9.75 | |
| 70.6863 | PISTON GUDGEON PIN (LONG TYPE) APPROX 60mm LONG | £9.75 | |
| 70.6867 | PISTON ASSEMBLY 650cc (PAIR) 11:1 COMP STD T120TTetc | £150.00 | |
| 70.6869 | PISTON CIRCLIP 250/500/650 | £0.75 | |
| 70.6930 | OIL JUNCTION BLOCK & PIPE ASSEMBLY 1966-72 650cc | £16.50 | Image |
| 70.7310 | PUSHROD TUBE SEAL 1969on (ORANGE) FITS INSIDE TUBE | £1.50 | Image |
| 70.7354 | POINTS COVER SCREW | £1.00 | |
| 70.7563 | TAPPET GUIDE BLOCK "O" RING | £1.50 | |
| 70.7573 | RUBBER PLUG | £0.75 | |
| 70.7680 | POINTS COVER PILLAR BOLT 1968 ONWARDS | £2.50 | Image |
| 70.8038 | ENGINE SPROCKET ALIGNMENT SHIM .010" | £0.75 | |
| 70.8737 | CONTACT BREAKER COVER CHROME | £7.50 | Image |
| 70.8737/SS | CONTACT BREAKER COVER STAINLESS STEEL | £12.50 | Image |
| 70.8751 | CYLINDER BASE HOLLOW DOWEL 3/8" | £2.50 | |
| 70.8752 | PRESSURE RELEASE VALVE PISTON | £3.50 | |
| 70.8754 | PRESSURE RELEASE VALVE CAP FIBRE WASHER GS254 | £0.75 | |
| 70.8782 | INSPECTION CAP "O" RING | £0.75 | |
| 70.8801 | CAM FOLLOWER EXHAUST (WITH OIL HOLE) 1967 ON | £45.00 | Image |
| 70.8828 | AUTO ADVANCE FIXING BOLT 26tpi | £1.50 | |
| 70.8992 | ALTERNATOR WIRE SLEEVE NUT 1969-72 (UNC THREAD) | £4.00 | Image |
| 70.9330 | CRANKCASE OILWAY PLUG T/SIDE 1970on | £2.00 | |
| 70.9332 | TACHO DRIVE BOX FIXING SCREW LEFT HAND THREAD 1969on | £6.50 | |
| 70.9334 | CHAINCASE BREATHER BAFFLE PLATE | £5.00 | Image |
| 70.9335 | ALLOY CRANKCASE BREATHER STUB 1969-75 | £5.00 | Image |
| 70.9336 | CRANKCASE SCAVENGE FILTER & PLUG 1964on | £15.30 | Image |
| 70.9348 | ROCKER BOX BASE GASKET (WIRED) 1963 TO 1970 | £4.00 | Image |
| 70.9348/C | ROCKER BOX BASE GASKET COPPER 1963 TO 1970 | £8.25 | |
| 70.9349 | PUSH ROD COVER TUBE 650cc 1969 TO 1973 | £22.50 | Image |
| 70.9352 | TAPPET GUIDE BLOCK INLET 1969 TO 1979 (& EXHAUST T100R) | £22.50 | Image |
| 70.9353 | TAPPET GUIDE BLOCK EXHAUST 1969-1979 (OIL FED) | £22.50 | Image |
| 70.9360 | ALTERNATOR WIRE SLEEVE NUT 1973on | £4.00 | Image |
| 70.9421 | OIL PUMP ASSEMBLY c/w SLIDER BLOCK (BY L F HARRIS) | £57.50 | Image |
| 70.9421/M | OIL PUMP MORGO PLUNGER TYPE ALL UNIT TWINS c/w SLIDER BLOCK | £79.95 | Image |
| 70.9488 | PISTON ASSY 9:1 STD ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 70.9488/20 | PISTON ASSY 9:1 +.020" ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 70.9488/40 | PISTON ASSY 9:1 +040" ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 70.9488/60 | PISTON ASSY 9:1 +060" ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 70.9516 | CYLINDER HEAD EXHAUST PIPE STUB 650/750cc | £8.50 | Image |
| 70.9525 | CON ROD ALL 650cc UNIT & LARGE JOURNAL PRE-UNIT 500 & 650 | £135.00 | Image |
| 70.9525/B | 650cc (& 500 PRE-UNIT) BILLET ALLOY CONNECTING RODS (Pair) SHELL TYPE ENGINES ONLY | £350.00 | Image |
| 70.9550/1 | INLET MANIFIOLDS Pair T120 1969-71 (SCREW IN) UNF THREAD (16tpi) | £65.00 | |
| 70.9554 | CARB MOUNTING STUD INSULATING RUBBER 69on | £1.00 | |
| 70.9555 | CARB MOUNTING STUD STEEL CUP (FOR RUBBER) 1969on | £1.50 | |
| 70.9711 | CARBURETTER FLANGE "O" RING THICK 1969on | £1.50 | |
| 70.9989 | EXHAUST CAMSHAFT 1963on E3134 PROFILE | £67.50 | Image |
| 71.0070 | ROCKER ARM BALL PIN (NO OIL HOLE) | £4.40 | |
| 71.0286 | CAMSHAFT BUSH TIMING SIDE (LIPPED) | £8.50 | Image |
| 71.0287 | CAMSHAFT BUSH DRIVE SIDE EXHAUST (+ INLET 1969on) | £8.50 | Image |
| 71.0288 | CAMSHAFT BUSH DRIVE SIDE INLET UPTO 1969 | £8.50 | Image |
| 71.0288/P | CAMSHAFT BUSH SET FOR BIKES WITH BREATHER ON INLET CAM (PRE 1970) | £34.00 | |
| 71.0288/S | CAMSHAFT BUSH SET FOR BIKES WITHOUT BREATHER ON INLET CAM (1970on) | £34.00 | |
| 71.1007 | INLET CAMSHAFT NUT C/W OIL PUMP DRIVE 1970 ONWARDS | £8.50 | |
| 71.1063 | INLET CAMSHAFT E3134 PROFILE (NO BREATHER HOLE) | £65.00 | |
| 71.1076 | USE 71.1460 BREATHER STUB GASKET | na | |
| 71.1078 | PRIMARY CHAIN OIL TUBE | £2.75 | |
| 71.1283 | PUSHROD TUBE SEAL 1969on (BLACK) | £1.50 | Image |
| 71.1345 | ALTERNATOR WIRE OUTER GROMMET | £2.00 | Image |
| 71.1457 | ROTOR INSPECTION COVER GASKET UNIT TWINS 1968on | £1.50 | Image |
| 71.1460 | BREATHER STUB TO CRANKCASE GASKET 1970on | £1.00 | |
| 71.1460 | CRANKCASE BREATHER STUB GASKET 1970on | £1.00 | |
| 71.1461 | OIL PUMP GASKET | £1.00 | |
| 71.1462 | CONTACT POINT'S COVER GASKET | £1.25 | Image |
| 71.1707 | PUSHROD TUBE BOTTOM SLEEVE 1972 TO 1979 | £2.50 | Image |
| 71.2079 | ROCKER BOX SIDE INSPECTION PLUG 1971-73 | £4.50 | Image |
| 71.2080 | ROCKER BOX SIDE INSPECTION PLUG COPPER CRUSH WASHER | £1.75 | |
| 71.2349 | BREATHER PIPE FROM "T" TO OIL TANK 1970-78 | £4.00 | |
| 71.2361 | ROCKER BOX LOCATING DOWEL 1971 650/750cc TWINS | £1.00 | |
| 71.2574 | ROCKER INSPECTION COVER GASKET 1972 (4 SCREW HOLES) | £2.50 | |
| 71.2575 | USE 70.9349 | na | |
| 71.2598 | CYLINDER HEAD NUT THICK WASHER 3/8" HOLE WITH SMALL O/D | £0.75 | |
| 71.2599 | ROCKER BOX BASE GASKET (WIRED) 650/750cc 1971 on | £4.00 | Image |
| 71.2599/C | ROCKER BOX BASE GASKET (COPPER) 650/750cc 1971 on | £7.50 | Image |
| 71.2653 | REV COUNTER GEARBOX DRIVEN GEAR VERTICAL 1966 ONWARDS TWINS AND T.160 | £12.50 | |
| 71.2660 | ENGINE SPROCKET ALIGNMENT SHIM .030" | £0.75 | |
| 71.2663 | ENGINE SPROCKET SPACER 1971on | £3.00 | |
| 71.2800/M | CRANKSHAFT OIL TUBE PLUG MORGO (ALLEN) 1972on | £3.75 | |
| 71.2813 | CARBURETTER MANIFOLD STUD T120/T140 | £3.75 | |
| 71.2877 | CRANKSHAFT 1/2 TIME PINION NUT 1972 ONWARDS | £3.50 | |
| 71.2888 | CYLINDER HEAD BOLT INSIDE ROCKER BOX 1972-74 650cc WITH 5/16" INTERNAL THREAD | £12.50 | |
| 71.2889 | ROCKER BOX BOLT 1972-74 650cc 5/16" SCREWS INTO INNER HEAD BOLT | £4.25 | |
| 71.2930 | OIL PRESSURE SWITCH RUBBER COVER (SAME AS D2045) | £3.75 | Image |
| 71.3446 | CYLINDER HEAD 1972 T120 ONLY (BARE) PUSH IN EX PIPES & BOLT ON CARBS | £375.00 | Image |
| 71.3447 | OIL PRESSURE RELEASE VALVE UNIT TWINS 55-65lbs | £30.00 | Image |
| 71.3447/S | OIL PRESSURE RELEASE VALVE UNIT TWINS IN STAINLESS STEEL | £42.50 | Image |
| 71.3556 | INLET MANIFOLD ALLOY TR6/TR7 1969on | £45.00 | |
| 71.3573 | INLET MANIFOLD TO HEAD GASKET 30mm 1973on T140V | £1.50 | |
| 71.3666 | CAMSHAFT PINION 1972 ONWARDS | £37.50 | |
| 71.3748 | VALVE COLLET (SPLIT COTTER) | £2.00 | |
| 71.3754 | OIL JUNCTION BLOCK GASKET (ALL UNIT TWINS) | £1.00 | Image |
| 71.3910 | OIL PUMP GASKET (ALL UNIT TWINS) | £1.00 | Image |
| 71.7011 | REV COUNTER DRIVE GEARBOX 1969on (L/H THREAD) | £49.50 | Image |
| 71.7159 | CONTACT BREAKER COVER FINNED ALLOY 1963on | £12.50 | Image |
| 71.7263 | TIMING COVER GASKET TR6/T120/TR7/T140 | £3.50 | Image |
| 71.7318 | TIMING COVER 650/750cc T120/T140 KICKSTART MODELS | £120.50 | Image |
| 71.7564 | PUSH ROD TUBE TR65 1981 ONWARDS BLACK GENUINE NOS | £20.00 | |
| 71.7679 | CRANKSHAFT HALF TIME PINION 1980 ONWARDS (GENUINE MERIDEN) | £35.00 | Image |
| 82.0879 | NUT 1/4" 26 TPI THREAD (OLD PART NUMBER F879) | £0.75 | |
| 82.1880 | COPPER WASHER 5/16" i.d. | £0.75 | |
| 82.2184 | CYLINDER HEAD BOLT WASHER (THICK 3/8") | £0.50 | |
| 82.2603 | CARBURETTER MANIFOLD FIXING BOLT T12O 1959 TO 1969 | £3.25 | |
| 82.2603 | CARBURETTER FIXING BOLT 15/16th uh T120 1959 TO 1968 | £3.25 | |
| 82.5259 | BOTTOM ENGINE MOUNTING STUD 1963/64 F5259 8 13/16" X 7/16" cei | £7.50 | |
| 82.5469 | FRONT ENGINE MOUNTING STUD 7/16"dia 1963-69 | £4.00 | |
| 82.6498 | BOTTOM ENGINE MOUNTING STUD 1965-70 8 1/16" X 7/16" | £5.75 | |
| 82.7353 | BREATHER VENT EXTENSION PIPE BLACK 5/16 X APPROX 41" | £5.00 | |
| 83.1356 | FRONT ENGINE PLATE TR6 & T120 1970 MODELS | £6.00 | Image |
| 83.1614 | BREATHER PIPE SILVER "D" SHAPE (AROUND MUDGUARD) 1970-72 | £9.50 | Image |
| 83.2829 | FRAME FILTER GASKET 1971on OIL IN FRAME MODELS | £2.50 | Image |
| 83.4813 | BREATHER PIPE SILVER "D" SHAPE (AROUND MUDGUARD) 1973-78 | £9.50 | |
| 97.0200 | TAPPET GUIDE BLOCK LOCATING BOLT | £2.50 | |
| 97.0430 | FIBRE WASHER 2BA (POINTS COVER & FORK DRAIN) | £0.50 | |
| 99.7037 | VALVE SPRING SET (4 INNER & 4 OUTER) | £17.50 | Image |
| CP.102 | VALVE SPRING SET T120 1959-65 | £17.50 | |
| HBS.6 | CYLINDER HEAD BOLT SET 9 STUD 1963-1970 | £60.00 | |
| NA43A | CARBURETTER TO MANIFOLD GASKET | £1.25 | |
| NE507 | FIBRE WASHER FOR INSPECTION CAP (G/BOX & C/CASE SLOTTED) | £1.00 | |
| O.S.04 | OIL SEAL SET 650 TWINS 1963-67 | £15.00 | |
| O.S.04/1 | OIL SEAL SET 650 TWINS 1970on 4 SPEED | £15.50 | |
| O.S.04A | OIL SEAL SET 650 TWINS 1968-69 | £15.00 | |
| O.S.05 | OIL SEAL SET 650cc & 750cc 5 SPEED TWINS TR6/T120V/TR7/T140 1973on | £17.50 | |
| PO.172A | NUT 3/8" X 26tpi CEI THREAD | £1.00 | |
| R.11050 | PISTON RING SET 650cc FOR STANDARD SIZE (6 RINGS) | £34.50 | |
| R.11050/20 | PISTON RING SET 650cc +.020" OVERSIZE (6 RINGS) | £34.50 | |
| R.11050/40 | PISTON RING SET 650cc +.040" OVERSIZE (6 RINGS) | £34.50 | |
| R.11050/60 | PISTON RING SET 650cc +.060" OVERSIZE (6 RINGS) | £34.50 | |
| SHC.134 | ALLEN SCREW KIT 650 1963 - 1968 bsf | £15.00 | |
| SHC.134/P | POSIDRIVE SCREW KIT UNIT 650 1963 TO 1968 | £24.50 | |
| SHC.135 | ALLEN SCREW KIT 650/750cc 1969 ONWARDS unc | £12.75 | |
| SHC.135/P1 | POSI SCREW KIT FOR OUTER COVERS 650cc 1969 TO 1970 unc | £12.75 | Image |
| SHC.135/P2 | POSI SCREW KIT FOR OUTER COVERS 650cc 1971 TO 1972 unc | £12.75 | Image |
| TW.02 | TAB WASHER SET 650 TWIN | £8.00 | |
| WK.01 | WOODRUFF KEY SET (5) UNIT 650/750 TWIN5 | £10.00 |
