Engine
PLEASE NOTE : If you want to change the order of the results, just click on the column heading, i.e. click on "Name" to view the products in alphabetical order by product name.
There are 347 parts in this category.
| Code | Name | Price | |
| 71.2575 | USE 70.9349 | na | |
| 70.4149 | PRIMARY CHAIN TENSIONER BLADE USE 70.6061 | £0.00 | |
| 60.0208-5 | PATENT PLATE HAMMER DRIVE SCREW USE 60.4255 | £0.00 | |
| 71.1076 | USE 71.1460 BREATHER STUB GASKET | na | |
| 60.4245 | WASHER 1/4" dia (THICK) | £0.30 | |
| 70.3302 | WASHER 1/4" DIA (THIN) UNDER ROCKER BOX | £0.35 | |
| 70.1612 | SERRATED WASHER WASHER 1/4" | £0.40 | |
| 60.2363 | BALL BEARING (7/32") (OIL PUMP) S70-7 | £0.40 | |
| 70.2441 | COPPER WASHER 1/4" dia | £0.50 | |
| 70.0402 | DRAIN PLUG FIBRE WASHER 3/8" i.d. | £0.50 | |
| 60.4255 | PATENT PLATE HAMMER DRIVE SCREW | £0.50 | |
| 82.2184 | CYLINDER HEAD BOLT WASHER (THICK 3/8") | £0.50 | |
| 97.0430 | FIBRE WASHER 2BA (POINTS COVER & FORK DRAIN) | £0.50 | |
| 82.0879 | NUT 1/4" 26 TPI THREAD (OLD PART NUMBER F879) | £0.75 | |
| 82.1880 | COPPER WASHER 5/16" i.d. | £0.75 | |
| 21.1877 | NUT 1/4" u.n.f. (SMALL HEADED) TR7 MANIFOLD TO HEAD | £0.75 | |
| 70.3751 | ROCKER BOX CAP FIBRE WASHER | £0.75 | |
| 71.2598 | CYLINDER HEAD NUT THICK WASHER 3/8" HOLE WITH SMALL O/D | £0.75 | |
| 71.2660 | ENGINE SPROCKET ALIGNMENT SHIM .030" | £0.75 | |
| 70.8754 | PRESSURE RELEASE VALVE CAP FIBRE WASHER GS254 | £0.75 | |
| 70.8782 | INSPECTION CAP "O" RING | £0.75 | |
| 57.1979 | FELT WASHER FOR MAINSHAFT (BY G/BOX SPROCKET) | £0.75 | |
| 14.0301 | NUT 1/4" UNF | £0.75 | |
| 70.1330 | ROCKER SPINDLE THRUST WASHER 3/8" dia | £0.75 | Image |
| 70.1335 | COPPER WASHER 3/8" dia | £0.75 | |
| 70.1575 | ROCKER SPINDLE THRUST WASHER 1/2" dia | £0.75 | Image |
| 70.3253 | ROCKER SPINDLE "O" RING | £0.75 | |
| 70.3887 | OIL PUMP NUT SERRATED WASHER | £0.75 | |
| 70.6869 | PISTON CIRCLIP 250/500/650 | £0.75 | |
| 70.7573 | RUBBER PLUG | £0.75 | |
| 70.8038 | ENGINE SPROCKET ALIGNMENT SHIM .010" | £0.75 | |
| 70.1670 | FIBRE WASHER PRESSURE RELEASE VALVE TO CRANKCASE | £0.75 | |
| 57.1553 | SCREW,1/4x26x3/8 CEI/BSF,PANHD (UNIT 650 R/BOX CLIP & SLICKSHIFT G/BOX COVER) | £1.00 | |
| 71.1460 | CRANKCASE BREATHER STUB GASKET 1970on | £1.00 | |
| 70.0403 | OIL PUMP SPRING (ALL TWINS) | £1.00 | |
| NE507 | FIBRE WASHER FOR INSPECTION CAP (G/BOX & C/CASE SLOTTED) | £1.00 | |
| 71.1460 | BREATHER STUB TO CRANKCASE GASKET 1970on | £1.00 | |
| 70.7354 | POINTS COVER SCREW | £1.00 | |
| 70.4569 | CRANKSHAFT T/COVER OIL SEAL RETAINING CIRCLIP | £1.00 | |
| 70.3821 | COUNTERSUNK SCREW FOR G/BOX SPROCKET COVER PLATE | £1.00 | |
| 70.0470 | TAPPET ADJUSTER NUT cei THREAD | £1.00 | |
| 70.2615 | TIMING COVER OIL WAY PLUG UPTO 1968 | £1.00 | |
| 14.1301 | 1/4" UNF SELF-LOCKING NUT | £1.00 | Image |
| 14.0208 | AUTO ADVANCE FIXING BOLT BOLT 1/4" UNF X 2.5" UNDER HEAD LONG | £1.00 | |
| 21.1908 | NUT OIL JUNCTION BLOCK 1970 ONWARDS | £1.00 | |
| 71.2361 | ROCKER BOX LOCATING DOWEL 1971 650/750cc TWINS | £1.00 | |
| 37.0103 | NUT 1/4" X 26tpi (SMALL HEADED) | £1.00 | |
| PO.172A | NUT 3/8" X 26tpi CEI THREAD | £1.00 | |
| 14.6608 | POSI HEADED SCREW 1/4"unc X 1" LONG | £1.00 | |
| 70.9554 | CARB MOUNTING STUD INSULATING RUBBER 69on | £1.00 | |
| 71.1461 | OIL PUMP GASKET | £1.00 | |
| 71.3754 | OIL JUNCTION BLOCK GASKET (ALL UNIT TWINS) | £1.00 | Image |
| 71.3910 | OIL PUMP GASKET (ALL UNIT TWINS) | £1.00 | Image |
| 71.1462 | CONTACT POINT'S COVER GASKET | £1.25 | Image |
| 14.0230 | CRANKCASE BOLT LONG T120/T140 1971on (5/16"unf X 5") | £1.25 | |
| 21.1875 | ROCKER BOX CORNER BOLT 1/4" unc 1969on | £1.25 | |
| 70.2412 | CYLINDER BASE NUT 3/8" 26tpi cei SMALL HEX HEAD (ALSO FITS FORK PINCH BOLT) | £1.25 | |
| NA43A | CARBURETTER TO MANIFOLD GASKET | £1.25 | |
| 21.0692 | CYLINDER BASE NUT (12 POINT) 3/8" unf 1969 on | £1.30 | Image |
| 14.6610 | POSI HEADED SCREW 1/4"unc X 1.5" LONG | £1.45 | |
| 14.0702 | 5/16" UNF THIN LOCK NUT | £1.50 | |
| 71.1457 | ROTOR INSPECTION COVER GASKET UNIT TWINS 1968on | £1.50 | Image |
| 71.1283 | PUSHROD TUBE SEAL 1969on (BLACK) | £1.50 | Image |
| 70.9555 | CARB MOUNTING STUD STEEL CUP (FOR RUBBER) 1969on | £1.50 | |
| 70.9711 | CARBURETTER FLANGE "O" RING THICK 1969on | £1.50 | |
| 70.8828 | AUTO ADVANCE FIXING BOLT 26tpi | £1.50 | |
| 71.3573 | INLET MANIFOLD TO HEAD GASKET 30mm 1973on T140V | £1.50 | |
| 70.7310 | PUSHROD TUBE SEAL 1969on (ORANGE) FITS INSIDE TUBE | £1.50 | Image |
| 21.1864 | OIL PUMP FIXING STUD 1/4" UNC/UNF 1969on | £1.50 | |
| 14.1401 | STUD 1/4" unc X 1/4" unf | £1.50 | |
| 21.1906 | OIL PUMP NUT 1/4" UNF 1969 ONWARDS (CONICAL SEATING) | £1.50 | |
| 60.3761 | CON ROD BOLT NUT (5/16"UNF) | £1.50 | |
| 70.2980 | ROCKER BOX STUD 1/4" x 15/16" o.a. (ALLOY HEAD MODELS) | £1.50 | |
| 70.1496 | PUSHROD TUBE BOTTOM SEAL BLACK (UPTO APPROX 1965) | £1.50 | Image |
| 70.1574 | ROCKER SPINDLE THACKERY (SPRING) WASHER 1/2" | £1.50 | Image |
| 70.3547 | PUSHROD TUBE SEAL (THIN WHITE) | £1.50 | Image |
| 70.3732 | OIL PUMP NUT UPTO 1968 cei | £1.50 | |
| 70.4752 | PUSHROD TUBE SEAL (WHITE) | £1.50 | Image |
| 70.5660 | INLET MANIFOLD TO HEAD GASKET TR6/TR7 | £1.50 | Image |
| 70.7563 | TAPPET GUIDE BLOCK "O" RING | £1.50 | |
| 71.2080 | ROCKER BOX SIDE INSPECTION PLUG COPPER CRUSH WASHER | £1.75 | |
| 14.0254 | FRONT ENGINE BOLT OIL IN FRAME TWINS & T150 | £1.75 | |
| 70.2962 | INLET MANIFOLD TO CARBURETTER STUD 1957-69 T110/TR6 | £2.00 | |
| 70.4154 | PRIMARY CHAINCASE DRAIN PLUG bsf | £2.00 | |
| 70.9330 | CRANKCASE OILWAY PLUG T/SIDE 1970on | £2.00 | |
| 21.1876 | INLET MANIFOLD TO CYL HEAD STUD 1/4" UNC/UNF TR6/TR7 | £2.00 | |
| 21.1865 | CYLINDER BASE STUD 3/8" UNC/UNF 1968 ON | £2.00 | |
| 21.1823 | CRANKCASE BOLT 1971on 5/16" X 3 3/4" (ALSO TANK ON 1971/2 WITH SEAM) | £2.00 | |
| 70.1580 | CRANKSHAFT PINION WOODRUFF KEY | £2.00 | |
| 70.1558 | CAMSHAFT PINION WOODRUFF KEY | £2.00 | |
| 70.4707 | POINTS WIRE GROMMET | £2.00 | |
| 70.4609 | ROCKER BOX CAP SPRING CLIP 650cc | £2.00 | Image |
| 70.3974 | ROTOR WOODRUFF KEY LONG TYPE | £2.00 | |
| 70.3975 | ALTERNATOR ROTOR TAB WASHER | £2.00 | Image |
| 70.4144 | ALTERNATOR WIRE SEALING GROMMET | £2.00 | Image |
| 71.3748 | VALVE COLLET (SPLIT COTTER) | £2.00 | |
| 71.1345 | ALTERNATOR WIRE OUTER GROMMET | £2.00 | Image |
| 21.0692CEI | CYLINDER BASE NUT (12 POINT) 3/8" 26tpi CYCLE THREAD | £2.00 | |
| 21.1996 | TR6/TR7 CARB TO MANIFOLD SHOULDERED STUD 1969on | £2.25 | |
| 70.4704 | PRIMARY CHAIN OIL TUBE | £2.25 | |
| 70.4535 | STUD 3" CRANKCASE TO GEAR BOX OUTER COVER 1963-68 bsf/cei | £2.50 | |
| 70.4706 | BLANKING PLUG BSF | £2.50 | |
| 70.3718 | OIL PUMP STUD 1957/68 350/500 ALSO 1964/68 650 | £2.50 | |
| 21.2182 | CRANKSHAFT ALTERNATOR ROTOR NUT 1973on | £2.50 | |
| 21.2183 | CRANKSHAFT ALTERNATOR ROTOR STUD 1973on | £2.50 | |
| 57.0989 | HOLLOW DOWEL 1/4" INSIDE DIAMETER | £2.50 | |
| 70.1532 | DOWEL 1/4 OD CYLINDER AND HEAD | £2.50 | |
| 70.4568 | OIL SEAL FOR TIMING COVER | £2.50 | |
| 70.4016 | TIMING COVER PATENT PLATE BADGE | £2.50 | Image |
| 70.3876 | CRANKSHAFT OIL SEAL DRIVE SIDE UP TO 1969 | £2.50 | |
| 70.4746 | PUSHROD TUBE SEAL BOTTOM CUP | £2.50 | Image |
| 70.4747 | POINTS COVER PILLAR BOLT | £2.50 | |
| 70.7680 | POINTS COVER PILLAR BOLT 1968 ONWARDS | £2.50 | Image |
| 70.5232 | CRANKCASE MOUTH SCREW UNIT 350/500/650cc UPTO 1968 (bsf) | £2.50 | |
| 21.1873 | CRANKCASE MOUTH INTERNAL SCREW (u.n.c THREAD) 1969on | £2.50 | |
| 71.2574 | ROCKER INSPECTION COVER GASKET 1972 (4 SCREW HOLES) | £2.50 | |
| 71.1707 | PUSHROD TUBE BOTTOM SLEEVE 1972 TO 1979 | £2.50 | Image |
| 70.8751 | CYLINDER BASE HOLLOW DOWEL 3/8" | £2.50 | |
| 83.2829 | FRAME FILTER GASKET 1971on OIL IN FRAME MODELS | £2.50 | Image |
| 97.0200 | TAPPET GUIDE BLOCK LOCATING BOLT | £2.50 | |
| 70.4098 | CRANKCASE HALF BOLT T20 1961on | £2.75 | |
| 70.3114 | CRANKSHAFT ALTERNATOR ROTOR STUD | £2.75 | |
| 71.1078 | PRIMARY CHAIN OIL TUBE | £2.75 | |
| 14.0252 | BOLT 3/8" unf X 3" FRONT ENGINE PLATES TO FRAME 1970 T120 | £2.75 | |
| 70.4705 | PRIMARY OIL PIPE CLIP | £3.00 | |
| 70.2922 | CONNECTING ROD BOLT NUT 26 TPI (CYCLE THREAD) | £3.00 | |
| 71.2663 | ENGINE SPROCKET SPACER 1971on | £3.00 | |
| 70.6387 | CRANKSHAFT TIMING COVER OIL SEAL -.020" UNDERSIZE | £3.20 | |
| 70.4573 | ENGINE SPROCKET TO ROTOR SPACER UNIT 650cc | £3.25 | |
| 70.3977 | CRANKSHAFT ALTERNATOR ROTOR NUT | £3.25 | |
| 82.2603 | CARBURETTER MANIFOLD FIXING BOLT T12O 1959 TO 1969 | £3.25 | |
| 82.2603 | CARBURETTER FIXING BOLT 15/16th uh T120 1959 TO 1968 | £3.25 | |
| 70.4568/UK | OIL SEAL FOR TIMING COVER POINTS & CRANK UNIT TWINS (UK MADE) | £3.50 | |
| 70.3523 | BARREL STUD AT DOWEL UPTO 1968 | £3.50 | |
| 70.3300 | CRANKSHAFT PINION CLAMPING WASHER | £3.50 | Image |
| 70.6309 | CYLINDER BASE GASKET 650/750 TWIN 1966on (WITH OIL FEED HOLE) | £3.50 | Image |
| 70.5315 | CRANKCASE FILTER COPPER WASHER | £3.50 | |
| 70.1513 | TAPPET ADJUSTER cei THREAD | £3.50 | |
| 21.1871 | BLANKING PLUG (L/H THREAD) WHEN REMOVING TACHO DRIVE 1970on | £3.50 | |
| 21.1872 | BLANKING PLUG (FOR TDC HOLE unc THREAD) 1969on | £3.50 | |
| 70.6347 | PRIMARY CHAIN ADJUSTER DRAIN PLUG bsf 1966-68 | £3.50 | |
| 70.2894 | CYLINDER BASE GASKET 650cc TWIN 1950-65 (NO OIL FEED HOLE) | £3.50 | Image |
| 71.7263 | TIMING COVER GASKET TR6/T120/TR7/T140 | £3.50 | Image |
| 70.8752 | PRESSURE RELEASE VALVE PISTON | £3.50 | |
| 71.2877 | CRANKSHAFT 1/2 TIME PINION NUT 1972 ONWARDS | £3.50 | |
| 71.2800/M | CRANKSHAFT OIL TUBE PLUG MORGO (ALLEN) 1972on | £3.75 | |
| 71.2813 | CARBURETTER MANIFOLD STUD T120/T140 | £3.75 | |
| 71.2930 | OIL PRESSURE SWITCH RUBBER COVER (SAME AS D2045) | £3.75 | Image |
| 70.2982 | ROCKER BOX CORNER BOLT ALLOY HEAD (FINE THREAD) | £3.75 | |
| 70.1435 | CHROME DOMED NUT 3/8" 26tpi (CYCLE THREAD) ROCKER SPINDLE etc | £4.00 | |
| 21.0669 | FRONT CRANKCASE 5/16" STUD FOR EX PIPE STAYS 1968on | £4.00 | |
| 82.5469 | FRONT ENGINE MOUNTING STUD 7/16"dia 1963-69 | £4.00 | |
| 70.4922 | PRIMARY CHAIN ADJUSTER DRAIN PLUG (LONG) 1964-65 | £4.00 | |
| 70.9360 | ALTERNATOR WIRE SLEEVE NUT 1973on | £4.00 | Image |
| 70.8992 | ALTERNATOR WIRE SLEEVE NUT 1969-72 (UNC THREAD) | £4.00 | Image |
| 71.2599 | ROCKER BOX BASE GASKET (WIRED) 650/750cc 1971 on | £4.00 | Image |
| 70.9348 | ROCKER BOX BASE GASKET (WIRED) 1963 TO 1970 | £4.00 | Image |
| 71.2349 | BREATHER PIPE FROM "T" TO OIL TANK 1970-78 | £4.00 | |
| 71.2889 | ROCKER BOX BOLT 1972-74 650cc 5/16" SCREWS INTO INNER HEAD BOLT | £4.25 | |
| 71.0070 | ROCKER ARM BALL PIN (NO OIL HOLE) | £4.40 | |
| 57.2259 | PRIMARY CHAIN ADJUSTER DRAIN PLUG unc 1969on | £4.50 | Image |
| 71.2079 | ROCKER BOX SIDE INSPECTION PLUG 1971-73 | £4.50 | Image |
| 70.4771 | CYLINDER HEAD BOLT CENTRE 5/16"dia (9 STUD HEADS) | £4.50 | |
| 70.9335 | ALLOY CRANKCASE BREATHER STUB 1969-75 | £5.00 | Image |
| 82.7353 | BREATHER VENT EXTENSION PIPE BLACK 5/16 X APPROX 41" | £5.00 | |
| 70.9334 | CHAINCASE BREATHER BAFFLE PLATE | £5.00 | Image |
| 70.4563 | EXHAUST CAMSHAFT NUT 1963-69 | £5.25 | |
| 70.6596 | OIL PRESSURE RELEASE VALVE DOMED CAP | £5.25 | |
| 70.0327 | CYLINDER HEAD BOLT SHORT OUTER | £5.25 | Image |
| 70.2256 | CAMSHAFT ROTARY BREATHER VALVE SPRING | £5.50 | |
| 70.3905 | CRANKSHAFT OIL TUBE PLUG SLOTTED | £5.50 | |
| 70.4147 | PRIMARY CHAIN ADJUSTER FRONT PIN 350/500cc 1961-69 & 650cc 1963-65 | £5.50 | |
| 82.6498 | BOTTOM ENGINE MOUNTING STUD 1965-70 8 1/16" X 7/16" | £5.75 | |
| 70.3905/M | CRANKSHAFT OIL TUBE PLUG ALLEN TYPE | £5.75 | |
| 70.4565 | CRANKSHAFT 1/2 TIME PINION NUT UPTO 1971 | £6.00 | |
| 70.0400 | INTERMEDIATE GEAR BUSH | £6.00 | Image |
| 83.1356 | FRONT ENGINE PLATE TR6 & T120 1970 MODELS | £6.00 | Image |
| 70.0495 | OIL PUMP PLUNGER SLIDER BLOCK (ALLOY) | £6.25 | Image |
| 70.6523 | EXHAUST CAM NUT 1970 ONWARDS | £6.25 | |
| 70.4016B | TIMING COVER PATENT PLATE BRASS | £6.50 | |
| 70.1543 | VALVE SPRING TOP COLLAR ALL MODELS (NOT 3T) | £6.50 | |
| 70.9332 | TACHO DRIVE BOX FIXING SCREW LEFT HAND THREAD 1969on | £6.50 | |
| 70.1544 | VALVE SPRING BOTTOM CUP FLAT TYPE UPTO 1965 | £6.50 | |
| 70.5976 | CHAIN ADJUSTER FRONT PIN 500cc 1969on & 650cc 1966on | £6.50 | |
| 70.4700 | TACHO DRIVE THIMBLE (PRESSES IN END OF EXH CAM) | £6.75 | |
| 70.0375 | INTERMEDIATE GEAR SPINDLE | £6.75 | Image |
| 70.6439 | VALVE SPRING BOTTOM CUP DEEP TYPE 1966on | £7.25 | |
| 71.2599/C | ROCKER BOX BASE GASKET (COPPER) 650/750cc 1971 on | £7.50 | Image |
| 57.2166/T | SLOTTED INSPECTION CAP REMOVAL & REFITTING TOOL (STAINLESS STEEL) | £7.50 | Image |
| 70.4536 | ALTERNATOR STATOR MOUNTING STUD LONG 1963-68 bsf/cei | £7.50 | |
| 70.1596 | HEAD BOLT LONG WITH THREADED EXTENSION | £7.50 | |
| 70.8737 | CONTACT BREAKER COVER CHROME | £7.50 | Image |
| 70.4772 | ALTERNATOR WIRE SLEEVE NUT 1963/64 | £7.50 | Image |
| 82.5259 | BOTTOM ENGINE MOUNTING STUD 1963/64 F5259 8 13/16" X 7/16" cei | £7.50 | |
| TW.02 | TAB WASHER SET 650 TWIN | £8.00 | |
| 21.1866 | ALTERNATOR STATOR MOUNTING STUD LONG 1969-73 UNC/UNF | £8.00 | |
| 21.1867 | ALTERNATOR STATOR MOUNTING STUD SHORT 1969-73 UNC/UNF | £8.00 | |
| 60.2133 | OIL PRESSURE SWITCH TAPER THREAD | £8.00 | |
| 70.9348/C | ROCKER BOX BASE GASKET COPPER 1963 TO 1970 | £8.25 | |
| 70.4537 | ALTERNATOR STATOR MOUNTING STUD SHORT 1963-68 bsf/cei | £8.50 | |
| 70.1463 | CAMSHAFT NUT INLET C/W OIL PUMP DRIVE UPTO 1969 | £8.50 | |
| 71.1007 | INLET CAMSHAFT NUT C/W OIL PUMP DRIVE 1970 ONWARDS | £8.50 | |
| 71.0286 | CAMSHAFT BUSH TIMING SIDE (LIPPED) | £8.50 | Image |
| 71.0287 | CAMSHAFT BUSH DRIVE SIDE EXHAUST (+ INLET 1969on) | £8.50 | Image |
| 71.0288 | CAMSHAFT BUSH DRIVE SIDE INLET UPTO 1969 | £8.50 | Image |
| 70.9516 | CYLINDER HEAD EXHAUST PIPE STUB 650/750cc | £8.50 | Image |
| 70.4610 | TAPPET INSPECTION CAP (UNIT ENGINES) | £8.75 | Image |
| 70.2490 | CONNECTING ROD BIG END BOLT 26 TPI (CYCLE THREAD) | £9.00 | |
| 70.2620 | ENGINE PUSH-ROD ALL 650cc & PRE-UNIT 500cc (ALLOY WITH STEEL END CAPS) | £9.00 | Image |
| 70.3907 | CRANKSHAFT FLYWHEEL BOLT (3 REQUIRED) | £9.00 | |
| 70.6328 | CRANKSHAFT FLYWHEEL BOLT (3 REQUIRED) 1966-67 | £9.00 | |
| 70.5153 | TACHO DRIVE BOX FIXING SCREW R/H THREAD 1966-68 | £9.00 | |
| 83.1614 | BREATHER PIPE SILVER "D" SHAPE (AROUND MUDGUARD) 1970-72 | £9.50 | Image |
| 83.4813 | BREATHER PIPE SILVER "D" SHAPE (AROUND MUDGUARD) 1973-78 | £9.50 | |
| 70.6861 | PISTON GUDGEON PIN (SHORT TYPE) APPROX 54mm LONG | £9.75 | |
| 70.6863 | PISTON GUDGEON PIN (LONG TYPE) APPROX 60mm LONG | £9.75 | |
| 70.2899/05 | INLET VALVE GUIDE CAST IRON +005" O/SIZE (MADE IN UK) | £10.00 | |
| 70.2899/15 | INLET VALVE GUIDE CAST IRON +015" O/SIZE (MADE IN UK) | £10.00 | |
| 70.2900/05 | EXHAUST VALVE GUIDE CAST IRON +005" O/SIZE (MADE IN UK) | £10.00 | |
| 70.2900/15 | EXHAUST VALVE GUIDE CAST IRON +015" O/SIZE (MADE IN UK) | £10.00 | |
| 70.5370 | BREATHER VENT PIPE "T" PIECE 1967-69 MODELS | £10.00 | |
| WK.01 | WOODRUFF KEY SET (5) UNIT 650/750 TWIN5 | £10.00 | |
| 21.2112 | BOTTOM ENGINE MOUNTING STUD 1971 ONWARDS | £10.00 | |
| 70.2899 | INLET VALVE GUIDE CAST IRON (MADE IN UK) | £10.00 | Image |
| 70.2900 | EXHAUST VALVE GUIDE CAST IRON (MADE IN UK) | £10.00 | Image |
| 70.3903 | CRANKSHAFT OIL SLUDGE TRAP TUBE | £10.50 | Image |
| 70.5316 | CAMSHAFT ROTARY BREATHER VALVE 1963-1969 | £10.50 | Image |
| 70.3827 | INLET VALVE GUIDE BRONZE (MADE IN UK) | £12.00 | Image |
| 70.3827/05 | INLET VALVE GUIDE BRONZE +.005" OVERSIZE | £12.00 | |
| 70.3827/10 | INLET VALVE GUIDE BRONZE +.010" OVERSIZE | £12.00 | |
| 70.3827/15 | INLET VALVE GUIDE BRONZE +.015" OVERSIZE | £12.00 | |
| 70.3828 | EXHAUST VALVE GUIDE BRONZE (MADE IN UK) | £12.00 | Image |
| 70.3828/05 | EXHAUST VALVE GUIDE BRONZE +.005" OVERSIZE | £12.00 | |
| 70.3828/10 | EXHAUST VALVE GUIDE BRONZE +.010" OVERSIZE | £12.00 | |
| 70.3828/15 | EXHAUST VALVE GUIDE BRONZE +.015" OVERSIZE | £12.00 | |
| 70.3828/02 | EXHAUST VALVE GUIDE BRONZE +.002" OVERSIZE | £12.00 | |
| 70.3828/04 | EXHAUST VALVE GUIDE BRONZE +.004" OVERSIZE | £12.00 | |
| 70.3828/06 | EXHAUST VALVE GUIDE BRONZE +.006" OVERSIZE | £12.00 | |
| 70.3827/02 | INLET VALVE GUIDE BRONZE +.002" OVERSIZE UK MADE | £12.00 | |
| 70.3827/04 | INLET VALVE GUIDE BRONZE +.004" OVERSIZE | £12.00 | |
| 70.3827/06 | INLET VALVE GUIDE BRONZE +.006" OVERSIZE | £12.00 | |
| 71.7159 | CONTACT BREAKER COVER FINNED ALLOY 1963on | £12.50 | Image |
| 70.8737/SS | CONTACT BREAKER COVER STAINLESS STEEL | £12.50 | Image |
| 71.2653 | REV COUNTER GEARBOX DRIVEN GEAR VERTICAL 1966 ONWARDS TWINS AND T.160 | £12.50 | |
| 71.2888 | CYLINDER HEAD BOLT INSIDE ROCKER BOX 1972-74 650cc WITH 5/16" INTERNAL THREAD | £12.50 | |
| 70.1511 | CON ROD SMALL END BUSH | £12.50 | Image |
| SHC.135 | ALLEN SCREW KIT 650/750cc 1969 ONWARDS unc | £12.75 | |
| 70.6576 | CON ROD BOLT 650cc UNF | £12.75 | |
| SHC.135/P1 | POSI SCREW KIT FOR OUTER COVERS 650cc 1969 TO 1970 unc | £12.75 | Image |
| SHC.135/P2 | POSI SCREW KIT FOR OUTER COVERS 650cc 1971 TO 1972 unc | £12.75 | Image |
| 70.5085 | PRIMARY CHAIN TENSIONER BLADE (TRIPLEX CHAIN) | £13.50 | Image |
| 70.6061 | PRIMARY CHAIN TENSIONER BLADE | £13.50 | Image |
| 70.5230 | CRANKCASE SCAVENGE FILTER & PLUG 1963only | £13.50 | |
| 70.5157 | REV COUNTER DRIVE GEAR 1966 ONWARDS | £14.75 | Image |
| 70.4603 | INLET VALVE 1.59" dia 1963on T120 & T140 ALSO 1966on TR6 | £15.00 | Image |
| 70.3310 | INLET VALVE 1.5" dia Pre UNIT TR6,T110, T120 & UNIT 6T,TR6 upto 1965 | £15.00 | |
| 70.3927 | EXHAUST VALVE 1.343"dia 1958-63 T110,TR6,T120 & 1963-66 6T ,TR6 | £15.00 | |
| 70.4547 | CYLINDER HEAD GASKET 9 STUD 650cc SOLID COPPER | £15.00 | |
| SHC.134 | ALLEN SCREW KIT 650 1963 - 1968 bsf | £15.00 | |
| O.S.04 | OIL SEAL SET 650 TWINS 1963-67 | £15.00 | |
| O.S.04A | OIL SEAL SET 650 TWINS 1968-69 | £15.00 | |
| 70.4610/T | ROCKER BOX CAP FITTING/REMOVING TOOL (4 LOCATING PEGS) HAS HEX TOP | £15.00 | Image |
| 70.9336 | CRANKCASE SCAVENGE FILTER & PLUG 1964on | £15.30 | Image |
| O.S.04/1 | OIL SEAL SET 650 TWINS 1970on 4 SPEED | £15.50 | |
| 70.6930 | OIL JUNCTION BLOCK & PIPE ASSEMBLY 1966-72 650cc | £16.50 | Image |
| O.S.05 | OIL SEAL SET 650cc & 750cc 5 SPEED TWINS TR6/T120V/TR7/T140 1973on | £17.50 | |
| 70.4590 | OIL JUNCTION BLOCK & PIPE ASSEMBLY 1963-65 650cc | £17.50 | Image |
| 57.2440 | CHAINCASE ROTOR INSPECTION COVER 1968on | £17.50 | Image |
| CP.102 | VALVE SPRING SET T120 1959-65 | £17.50 | |
| 99.7037 | VALVE SPRING SET (4 INNER & 4 OUTER) | £17.50 | Image |
| 60.4167 | MAIN BEARING TIMING SIDE BALL RACE ENGINE No GE27029on | £20.00 | |
| 71.7564 | PUSH ROD TUBE TR65 1981 ONWARDS BLACK GENUINE NOS | £20.00 | |
| 70.6000 | PUSHROD TUBE 6T/TR6/T120 1966 TO 1968 | £20.00 | Image |
| 70.1457 | ROCKER ARM (RIGHT EXHAUST or LEFT INLET) USE 71.7044 WITH UNF ADJUSTER | £21.20 | |
| 70.1458 | ROCKER ARM (LEFT EXHAUST or RIGHT INLET) cei THREAD UPTO 1978 | £21.20 | |
| 70.2904 | EXHAUST VALVE (1.437 HEAD DIAMETER) | £21.50 | Image |
| 70.1477 | TAPPET GUIDE BLOCK UPTO 1965 | £22.50 | Image |
| 70.5861 | TAPPET GUIDE BLOCK EXHAUST 1966 TO 1968 | £22.50 | Image |
| 70.4676 | TAPPET GUIDE BLOCK 1964 TO 1968 (INLET 650cc) | £22.50 | Image |
| 70.3646 | PUSHROD TUBE TR6/T110/T120 ALLOY HEAD 1958-1965 | £22.50 | Image |
| 70.3586 | BIG END SHELL'S STD (ENGINE SET FOR 2 RODS) | £22.50 | Image |
| 70.3586/10 | BIG END SHELL'S .010" U/S (ENGINE SET FOR 2 RODS) | £22.50 | Image |
| 70.3586/20 | BIG END SHELL'S .020" U/S (ENGINE SET FOR 2 RODS) | £22.50 | Image |
| 70.9349 | PUSH ROD COVER TUBE 650cc 1969 TO 1973 | £22.50 | Image |
| 70.9352 | TAPPET GUIDE BLOCK INLET 1969 TO 1979 (& EXHAUST T100R) | £22.50 | Image |
| 70.9353 | TAPPET GUIDE BLOCK EXHAUST 1969-1979 (OIL FED) | £22.50 | Image |
| SHC.134/P | POSIDRIVE SCREW KIT UNIT 650 1963 TO 1968 | £24.50 | |
| 70.4547/80 | HEAD GASKET 9 STUD 650cc SOLID COPPER (.080") THICK | £25.00 | |
| 70.3586/30 | BIG END SHELL'S .030" U/S (ENGINE SET FOR 2 RODS) | £25.00 | Image |
| 70.3586/40 | BIG END SHELL'S .040" U/S (ENGINE SET FOR 2 RODS) | £25.00 | Image |
| 70.6595 | OIL PRESSURE RELEASE VALVE 75-85lbs | £30.00 | |
| 71.3447 | OIL PRESSURE RELEASE VALVE UNIT TWINS 55-65lbs | £30.00 | Image |
| 70.3586/G | BIG END SHELL'S STD (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/10/G | BIG END SHELL'S .010" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/20/G | BIG END SHELL'S .020" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/30/G | BIG END SHELL'S .030" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.3586/40/G | BIG END SHELL'S .040" U/S (GLACIER) (ENGINE SET FOR 2 RODS) | £32.50 | |
| 70.1512 | ROCKER SPINDLE (INLET or EXHAUST) | £33.00 | |
| 71.0288/S | CAMSHAFT BUSH SET FOR BIKES WITHOUT BREATHER ON INLET CAM (1970on) | £34.00 | |
| 71.0288/P | CAMSHAFT BUSH SET FOR BIKES WITH BREATHER ON INLET CAM (PRE 1970) | £34.00 | |
| R.11050 | PISTON RING SET 650cc FOR STANDARD SIZE (6 RINGS) | £34.50 | |
| R.11050/20 | PISTON RING SET 650cc +.020" OVERSIZE (6 RINGS) | £34.50 | |
| R.11050/40 | PISTON RING SET 650cc +.040" OVERSIZE (6 RINGS) | £34.50 | |
| R.11050/60 | PISTON RING SET 650cc +.060" OVERSIZE (6 RINGS) | £34.50 | |
| 70.6159 | INTERMEDIATE WHEEL TIMING GEAR 650/750cc | £35.00 | Image |
| 71.7679 | CRANKSHAFT HALF TIME PINION 1980 ONWARDS (GENUINE MERIDEN) | £35.00 | Image |
| 70.4564 | CRANKSHAFT HALF TIME PINION 1965-1980 | £35.00 | |
| 71.3666 | CAMSHAFT PINION 1972 ONWARDS | £37.50 | |
| 70.1591 | CRANKSHAFT MAIN BALL BEARING (1.1/8" dia) RHP MADE IN UK | £39.50 | Image |
| 70.3059 | CAM FOLLOWER STANDARD | £42.50 | |
| 70.3059R | CAM FOLLOWER "R" TYPE | £42.50 | |
| 71.3447/S | OIL PRESSURE RELEASE VALVE UNIT TWINS IN STAINLESS STEEL | £42.50 | Image |
| 70.3304 | INLET CARB MANIFOLD 500/650cc 1954 TO 1966 | £44.00 | |
| 71.3556 | INLET MANIFOLD ALLOY TR6/TR7 1969on | £45.00 | |
| 70.8801 | CAM FOLLOWER EXHAUST (WITH OIL HOLE) 1967 ON | £45.00 | Image |
| 70.6349 | ROCKER OIL FEED PIPE | £45.00 | |
| 60.7362 | MAIN BEARING TIMING SIDE ROLLER CONVERSION 1972 ONWARDS | £48.50 | |
| 71.7011 | REV COUNTER DRIVE GEARBOX 1969on (L/H THREAD) | £49.50 | Image |
| 70.5756 | TACHO DRIVE GEARBOX 650cc 1966-68 (R/H THREAD) | £55.00 | Image |
| 70.9421 | OIL PUMP ASSEMBLY c/w SLIDER BLOCK (BY L F HARRIS) | £57.50 | Image |
| 70.2879CN | CRANKSHAFT DRIVE SIDE MAIN ROLLER BEARING CN FIT | £58.00 | |
| HBS.6 | CYLINDER HEAD BOLT SET 9 STUD 1963-1970 | £60.00 | |
| 71.1063 | INLET CAMSHAFT E3134 PROFILE (NO BREATHER HOLE) | £65.00 | |
| 70.9550/1 | INLET MANIFIOLDS Pair T120 1969-71 (SCREW IN) UNF THREAD (16tpi) | £65.00 | |
| 70.5349/50 | INLET MANIFIOLDS Pair T120 1963-68 (SCREW IN) cei THREAD | £65.00 | Image |
| 70.9989 | EXHAUST CAMSHAFT 1963on E3134 PROFILE | £67.50 | Image |
| 70.3134 | CAMSHAFT E3134 PROFILE | £67.50 | Image |
| 70.2879/C2 | CRANKSHAFT DRIVE SIDE MAIN ROLLER BEARING C2 FIT RHP UK MADE | £69.50 | Image |
| 70.2879/C3 | CRANKSHAFT DRIVE SIDE MAIN ROLLER BEARING C3 FIT RHP UK MADE | £69.50 | |
| 70.9421/M | OIL PUMP MORGO PLUNGER TYPE ALL UNIT TWINS c/w SLIDER BLOCK | £79.95 | Image |
| 70.3610/20 | PISTON ASSEMBLY +020" (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.00 | Image |
| 70.3610/40 | PISTON ASSEMBLY +040" (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.00 | Image |
| 70.3610/60 | PISTON ASSEMBLY +060" (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.00 | Image |
| 70.3610 | PISTON ASSEMBLY STD (PAIR) 6T/T110 7.5:1 COMP ALLOY HEAD LF HARRIS | £95.50 | Image |
| 70.9488 | PISTON ASSY 9:1 STD ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 70.9488/20 | PISTON ASSY 9:1 +.020" ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 70.9488/40 | PISTON ASSY 9:1 +040" ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 70.9488/60 | PISTON ASSY 9:1 +060" ALLOY HEAD 650cc (PAIR) LF HARRIS | £100.00 | Image |
| 71.7318 | TIMING COVER 650/750cc T120/T140 KICKSTART MODELS | £120.50 | Image |
| 70.9525 | CON ROD ALL 650cc UNIT & LARGE JOURNAL PRE-UNIT 500 & 650 | £135.00 | Image |
| 17844/AE | PISTON ASSEMBLY (PAIR) 650cc 9:1 STD GENUINE AE | £150.00 | Image |
| 17844/AE20 | PISTON ASSEMBLY (PAIR) 650cc 9:1 +.020" O/S GENUINE AE | £150.00 | Image |
| 17844/AE40 | PISTON ASSEMBLY (PAIR) 650cc 9:1 +.040" O/S GENUINE AE | £150.00 | Image |
| 17844/AE60 | PISTON ASSEMBLY 650cc (PAIR) 9:1 +.060" O/S GENUINE AE | £150.00 | Image |
| 70.6867 | PISTON ASSEMBLY 650cc (PAIR) 11:1 COMP STD T120TTetc | £150.00 | |
| 70.9525/B | 650cc (& 500 PRE-UNIT) BILLET ALLOY CONNECTING RODS (Pair) SHELL TYPE ENGINES ONLY | £350.00 | Image |
| 71.3446 | CYLINDER HEAD 1972 T120 ONLY (BARE) PUSH IN EX PIPES & BOLT ON CARBS | £375.00 | Image |
