Engine
PLEASE NOTE : If you want to change the order of the results, just click on the column heading, i.e. click on "Name" to view the products in alphabetical order by product name.
There are 200 parts in this category.
| Code | Name | Price | |
| 67.0968 | INLET VALVE A10 ALLOY HEAD USE 67.1551 | £0.00 | |
| 24.0563 | TAPPET ADJUSTER LOCK NUT USE 70.0470 | £0.00 | |
| 66.0954 | USE 71.3700 | na | |
| 68.0130 | USE 70.3822 | na | |
| 68.0131 | USE 70.2254 | na | |
| 68.0132 | USE 70.2256 | na | |
| 68.0184 | USE 70.3905 | na | |
| 68.0185 | USE 70.3903 | na | |
| 71.2370 | USE 71.3447 | na | |
| 70.0402 | DRAIN PLUG FIBRE WASHER 3/8" i.d. | £0.50 | |
| 70.3446 | WASHER 5/16" SMALL O/DIAMETER | £0.50 | |
| 24.5160 | NUT 5/16" bscy | £0.60 | |
| 67.0101 | PISTON CIRCLIP VARIOS | £0.75 | |
| 70.1575 | ROCKER SPINDLE THRUST WASHER 1/2" dia | £0.75 | Image |
| 70.1330 | ROCKER SPINDLE THRUST WASHER 3/8" dia | £0.75 | Image |
| 70.8782 | INSPECTION CAP "O" RING | £0.75 | |
| 71.3700 | PISTON CIRCLIP | £0.75 | |
| 82.1880 | COPPER WASHER 5/16" i.d. | £0.75 | |
| 70.0470 | TAPPET ADJUSTER NUT cei THREAD | £1.00 | |
| 70.3821 | COUNTERSUNK SCREW FOR G/BOX SPROCKET COVER PLATE | £1.00 | |
| 68.0163 | CIRCLIP TAPPET LOCATING A50/A65 | £1.00 | |
| 37.0103 | NUT 1/4" X 26tpi (SMALL HEADED) | £1.00 | |
| 14.6608 | POSI HEADED SCREW 1/4"unc X 1" LONG | £1.00 | |
| 21.0692 | CYLINDER BASE NUT (12 POINT) 3/8" unf 1969 on | £1.30 | Image |
| 14.6610 | POSI HEADED SCREW 1/4"unc X 1.5" LONG | £1.45 | |
| 45877 | MAGNETO FLANGE GASKET TWIN'S | £1.50 | |
| 27.1396 | IDLER PINION WOODRUFF KEY A7/A10 | £1.50 | |
| 71.1424 | SUMP PLATE GASKET B25/C25/B44/B50/A7/A10/A50/A65 | £1.50 | |
| 67.1395 | OIL PUMP STUD LONG A7/A10 | £1.50 | |
| 67.1537 | CON ROD BOLT NUT | £1.50 | |
| 68.0158 | VALVE COLLET C25/B25/TR25/A50/65 | £1.50 | |
| 70.1574 | ROCKER SPINDLE THACKERY (SPRING) WASHER 1/2" | £1.50 | Image |
| 02.0124 | CAMSHAFT NUT A7/A10/A50/A65 | £1.75 | |
| 67.0644 | CRANKSHAFT PINION LOCK WASHER | £2.00 | |
| 68.0325 | ROTOR TAB WASHER | £2.00 | |
| 70.4144 | ALTERNATOR WIRE SEALING GROMMET | £2.00 | Image |
| 70.8144 | ROTOR WOODRUFF KEY | £2.00 | |
| 67.1396 | OIL PUMP STUD SHORT A7/A10 | £2.00 | |
| 76.0291 | POINTS OIL SEAL A50/A65 1969 ONWARDS | £2.10 | |
| 65.1624 | VALVE COLLET ROCKET | £2.25 | |
| 83.2829 | FRAME FILTER GASKET 1971on OIL IN FRAME MODELS | £2.50 | Image |
| 68.0046 | CYLINDER BASE GASKET A50/A65 1962-69 (5/16" BASE STUDS) | £2.50 | |
| 42.7509 | GASKET INNER CHAINCASE TO TO CRANKCASE A7/A10 S/ARM | £2.50 | |
| 70.8082 | ROCKER FEED ADAPTOR B25/C25/A50/A65 (SAME AS 76.0308) | £2.50 | Image |
| 68.0026 | POINTS OIL SEAL A50/A65 1962 - 1968 | £2.75 | |
| 67.0674 | CRANKSHAFT DRIVE SIDE OIL SEAL | £3.00 | |
| 67.0643 | CRANKSHAFT PINION LOCK NUT (L/H THREAD) | £3.00 | |
| 24.0195 | MAGNETO PINION SHOULDERED NUT (MANUAL GEAR TYPE) A7SS & A10SR etc | £3.00 | |
| 67.1400 | NON RETURN VALVE SPRING & BALL A7/A10 | £3.00 | |
| 29.2023 | ROTOR NUT PLAIN | £3.25 | |
| 29.0410 | VALVE COLLET A7/A7SS/A10 NOT ROCKET | £3.50 | |
| 70.3822 | BREATHER VALVE | £3.50 | |
| 70.1513 | TAPPET ADJUSTER cei THREAD | £3.50 | |
| 67.0056 | TAPPET ADJUSTER SCREW A7/A10 | £3.50 | |
| 68.0155 | TAPPET ADJUSTER SCREW A50/A65 | £3.50 | |
| 71.1433 | CYLINDER BASE GASKET A50/A65 1970on (3/8" BASE STUDS) | £3.50 | |
| 68.0144 | ROCKER COVER GASKET A50/A65 1962-70 (1/4" HOLES) | £3.50 | |
| 71.2930 | OIL PRESSURE SWITCH RUBBER COVER (SAME AS D2045) | £3.50 | Image |
| 65.0615 | CRANKSHAFT OIL PLUG A7/10 SMALL JOURNAL | £4.25 | |
| 65.0317 | ROCKER OIL FEED BOLT A7/A10 | £4.50 | |
| 21.2091 | FRONT ENGINE BOLT OIL IN FRAME A65 | £4.50 | |
| 67.0282 | OUTER TIMING COVER GASKET A7/A10 1950 TO 1962 | £5.00 | |
| 68.0217 | INNER TIMING COVER GASKET A50/A65 1963-70 | £5.00 | |
| 70.6596 | OIL PRESSURE RELEASE VALVE DOMED CAP | £5.25 | |
| 70.3905 | CRANKSHAFT OIL TUBE PLUG SLOTTED | £5.50 | |
| 70.2256 | CAMSHAFT ROTARY BREATHER VALVE SPRING | £5.50 | |
| 67.0886 | VALVE SPRING BOTTOM CUP A10SR | £5.50 | |
| 67.0033 | VALVE SPRING BOTTOM CUP A7/A10 | £5.75 | |
| 70.3905/M | CRANKSHAFT OIL TUBE PLUG ALLEN TYPE | £5.75 | |
| 68.0022 | CAMSHAFT BUSH AT BREATHER END A50/A65 | £5.75 | |
| 21.2115 | BOTTOM ENGINE STUD OIL IN FRAME A65 | £6.00 | |
| 60.0633-5 | CRANKSHAFT SHIM SET A50/A65 | £6.50 | |
| 67.0671/2 | CRANKSHAFT ENDFLOAT SHIM SET | £6.50 | |
| 67.0393 | SMALL END BUSH A7 1951-1962 | £6.75 | |
| 67.0298 | SMALL END BUSH A10/A50/A65 | £7.50 | |
| 67.0034 | VALVE SPRING TOP COLLAR A7/A10 | £7.50 | |
| 67.1211 | CRANK OIL WAY PLUG (COARSE THREAD) ALLEN TYPE | £7.50 | |
| 42.7507 | PRIMARY CHAINCASE GASKET A7/A10 SWINGING ARM | £7.50 | |
| 68.0241 | PRIMARY CHAINCASE GASKET A50/A65 (ALSO 70.7854) | £7.50 | |
| 71.1437 | INNER TIMING COVER GASKET A65 1971on | £7.50 | |
| 57.2166/T | SLOTTED INSPECTION CAP REMOVAL & REFITTING TOOL (STAINLESS STEEL) | £7.50 | Image |
| 68.3259 | CLUTCH CABLE ABUTMENT A50/A65 | £7.75 | Image |
| 67.0960 | VALVE SPRING TOP COLLAR A10SR | £7.75 | |
| 67.1269 | LONG EXTENDED MAG NUT A7/A10 | £7.95 | |
| TW.05 | TAB WASHER SET A50/A65 | £8.00 | |
| O.S.14 | OIL SEAL SET A7/A10 (D/S CRANK & G/BOX SEALS) | £8.50 | |
| 68.0365 | INLET ENGINE PUSH ROD A50 | £8.75 | |
| 68.0367 | EXHAUST ENGINE PUSH ROD A65 | £8.75 | |
| 68.3054 | KICKSTART SPRING PLATE A50/A65 | £9.50 | |
| 67.1536 | CON ROD BOLT LARGE JOURNAL A10 AND A50/A65 | £9.75 | |
| TW.04 | TAB WASHER SET A7/A10 | £10.00 | |
| 67.0031 | VALVE GUIDE CAST IRON A7/A10 | £10.00 | Image |
| 68.0159 | VALVE GUIDE CAST IRON A50/A65 1962-1971 UK MADE | £10.00 | |
| BSA.329 | BSA A7/A10 ROCKER BOX GASKET SET | £10.00 | |
| 70.3903 | CRANKSHAFT OIL SLUDGE TRAP TUBE | £10.50 | Image |
| 67.1212 | CRANK OIL WAY PLUG (COARSE THREAD) WITH PEG ALLEN TYPE | £10.50 | |
| 71.1126 | SUMP FILTER GAUZE 1970 ONWARDS A50/A65 | £11.50 | |
| O.S.09/1 | OIL SEAL SET A50/A65 1969onwards | £12.00 | |
| 67.1110/02 | VALVE GUIDE BRONZE A7/A10 +.002" (MADE IN UK) | £12.00 | |
| 67.1110/04 | VALVE GUIDE BRONZE A7/A10 +.004" (MADE IN UK) | £12.00 | |
| 67.1110/06 | VALVE GUIDE BRONZE A7/A10 +.006" (MADE IN UK) | £12.00 | |
| 68.0809/02 | VALVE GUIDE BRONZE A50/A65 1962-1970 + .002" UK MADE | £12.00 | |
| 68.0809/04 | VALVE GUIDE BRONZE A50/A65 1962-1970 + .004" UK MADE | £12.00 | |
| 68.0809/06 | VALVE GUIDE BRONZE A50/A65 1962-1970 + .006" UK MADE | £12.00 | |
| 67.1110 | VALVE GUIDE BRONZE A7/A10 | £12.00 | Image |
| O.S.09 | OIL SEAL SET A50/A65 1962-68 | £12.00 | |
| 68.0809 | VALVE GUIDE BRONZE A50/A65 1962-1970 UK MADE | £12.00 | |
| 68.0370 | INLET ENGINE PUSH ROD A65 | £12.00 | |
| 68.0372 | EXHAUST ENGINE PUSH ROD A65 | £12.00 | |
| 67.0255/C | HEAD GASKET SOLID COPPER A10 1950 - 1963 | £12.50 | |
| 68.0586 | REV COUNTER DRIVE SPINDLE A50/A65 | £12.75 | |
| 68.0156 | INLET VALVE A65 1962/65 | £14.75 | |
| 68.0168 | INLET VALVE A50 1962/65 | £15.00 | |
| 68.0169 | EXHAUST VALVE A50 1962/65 | £15.00 | |
| 68.0100/C | HEAD GASKET SOLID COPPER A50 1962 - 1970 | £15.00 | |
| 68.0661 | INLET VALVE A50 1966 ONWARDS | £15.00 | |
| 68.0662 | EXHAUST VALVE A50 1966 ONWARDS | £15.00 | |
| 68.0665 | INLET VALVE A65 1966 ONWARDS | £15.00 | |
| 68.0781/C | HEAD GASKET SOLID COPPER A65 1962 - 1972 | £15.00 | |
| 67.0740 | INLET VALVE A7 | £15.00 | |
| 67.0741 | EXHAUST VALVE A7 | £15.00 | |
| 67.0742 | INLET VALVE A10 | £15.00 | |
| 67.0743 | EXHAUST VALVE A10 | £15.00 | |
| 67.0967 | EXHAUST VALVE A10 ROCKET | £15.00 | |
| 67.1551 | VALVE INLET A10 SUPER ROCKET 1.450" | £15.00 | |
| VSS.3 | VALVE SPRING SET A50/A65 1962-1967 (51mm OUTER) | £15.00 | |
| 67.0120 | CARBURETTER DRIP TRAY A7/A10 | £15.00 | |
| PRS.1 | ALLOY PUSH ROD SET A7 | £15.00 | |
| PRS.2 | ALLOY PUSH ROD SET A10 | £15.00 | |
| 42.0062 | ROCKER BOX BOLT SET (5) (4 LONG + 1 SHORT) A7/A10 | £15.00 | |
| 68.0710 | IGNITION TIMING TOOL A50/A65 | £15.50 | |
| 68.0663 | EXHAUST VALVE A65 ALL YEARS | £16.50 | |
| VSS.4 | VALVE SPRING SET A50/A65 1968 ONWARDS (44mm OUTER) | £18.75 | |
| 68.0685 | CRANKSHAFT TIMING SIDE THRUST WASHER 1966on A50/A65 | £19.50 | |
| 68.0585 | REV COUNTER DRIVE ALLOY HOUSING A50/A65 | £20.00 | |
| 68.0028 | IDLER BUSH INNER A50/A65 UPTO 1968 | £21.00 | |
| H.B.S.1 | CYLINDER HEAD BOLT SET A7/10 IRON HEAD | £22.00 | |
| H.B.S.2 | CYLINDER HEAD BOLT SET A7/10 ALLOY HEAD | £22.00 | |
| H.B.S.3 | CYLINDER HEAD BOLT SET A50/A65 1962 TO 1967 | £22.00 | |
| H.B.S.4 | CYLINDER HEAD BOLT SET A50/A65 1968 TO 1970 | £22.00 | |
| VSS.1 | VALVE SPRING SET A7/A7SS/A10 | £22.50 | |
| 67.1430 | BIG END SHELLS STD LARGE JOURNAL A10/A50/A65 | £22.50 | |
| 67.1430/10 | BIG END SHELLS .010" LARGE JOURNAL A10/A50/A65 | £22.50 | |
| 67.1430/20 | BIG END SHELLS .020" LARGE JOURNAL A10/A50/A65 | £22.50 | |
| 67.1430/30 | BIG END SHELLS .030" LARGE JOURNAL A10/A50/A65 | £22.50 | |
| 67.1535 | CON ROD BOLT A7 PLUS SMALL JOURNAL A10 MODELS (UK MADE) | £22.50 | |
| 67.1430/40 | BIG END SHELLS .040" LARGE JOURNAL A10/A50/A65 | £22.50 | |
| 67.0670 | DRIVE SIDE MAIN ROLLER BEARING A7/10 NYLON CAGE | £22.50 | |
| 67.0286 | IDLER BUSH INNER A7/A10 | £24.00 | |
| 42.0048 | ROCKER FEED PIPE A7/A10 | £24.00 | |
| 68.0025 | CAMSHAFT BUSH TOP HAT SHAPE A50/A65 | £25.00 | |
| 71.2300 | VALVE GUIDE BRONZE A65 1971 ONWARDS (COLLAR TYPE) | £25.50 | |
| VSS.2 | VALVE SPRING SET A10S/R ALLOY HEAD | £25.50 | |
| 67.1430/50 | BIG END SHELLS .050" LARGE JOURNAL A10/A50/A65 | £25.50 | |
| 67.1430/60 | BIG END SHELLS .060" LARGE JOURNAL A10/A50/A65 | £25.50 | |
| 67.0961 | INLET VALVE A10 RGS LARGE SIZE 1.475" | £27.00 | |
| 71.3447 | OIL PRESSURE RELEASE VALVE UNIT TWINS 55-65lbs | £27.50 | Image |
| 67.0642 | CRANKSHAFT WORM DRIVE A7/A10 | £30.00 | |
| 67.0686 | CAMSHAFT BUSH + OUTER IDLER BUSH A7/A10 | £30.00 | |
| 67.1240 | CRANKSHAFT DRIVE SIDE BALL BEARING A50/A65 1962-65 | £32.50 | |
| R.17350 | PISTON RING SET A65 STD (6 RINGS) | £34.50 | |
| 67.0244 | BIG END SHELL STD A7 + A10 SMALL JOURNAL | £37.50 | |
| 67.0244/10 | BIG END SHELL .010" A7 & A10 SMALL JOURNAL | £37.50 | |
| 67.0244/20 | BIG END SHELLS .020" A7 + A10 SMALL JOURNAL | £37.50 | |
| 67.0244/30 | BIG END SHELLS .030" A7 + A10 SMALL JOURNAL | £37.50 | |
| 67.0670/S | DRIVE SIDE MAIN ROLLER BEARING A7/10 STEEL CAGE | £37.50 | |
| 67.0064 | ROCKER SPINDLE A7/A10 | £37.50 | |
| 67.0244/40 | BIG END SHELL .040" A7 + A10 SMALL JOURNAL | £37.50 | |
| 68.0310 | OIL PUMP DRIVE SPINDLE A50/A65 | £39.50 | |
| R.17350/20 | PISTON RING SET A65 +.020" (6 RINGS) | £39.75 | |
| R.17350/40 | PISTON RING SET A65 +.040" (6 RINGS) | £39.75 | |
| R.17350/60 | PISTON RING SET A65 +.060" (6 RINGS) | £39.75 | |
| 68.0362 | CAM FOLLOWER (TAPPET) A50 & A65 ALL YEARS (GENUINE BSA) | £40.00 | |
| R.3650 | PISTON RING SET A10 STANDARD (6 RINGS) | £40.50 | |
| R.3650/20 | PISTON RING SET A10 +.020" (6 RINGS) | £40.50 | |
| R.3650/40 | PISTON RING SET A10 +.040" (6 RINGS) | £40.50 | |
| R.3650/60 | PISTON RING SET A10 +.060" (6 RINGS) | £40.50 | |
| 71.3447/S | OIL PRESSURE RELEASE VALVE UNIT TWINS IN STAINLESS STEEL | £42.50 | Image |
| 42.8346/7 | OIL TANK TO ENGINE OIL PIPE SET A7 & A10 (STEEL OUTER CASING) | £45.00 | |
| 67.0670/B | DRIVE SIDE MAIN ROLLER BEARING BRASS CAGE A7/10 | £49.50 | |
| 67.0790 | CRANKSHAFT MAIN BEARING BUSH STD A7/A10 | £50.00 | Image |
| 67.0790/10 | CRANKSHAFT MAIN BEARING BUSH .010" A7/A10 | £50.00 | Image |
| 67.0790/20 | CRANKSHAFT MAIN BEARING BUSH .020" A7/A10 | £50.00 | Image |
| 67.0790/30 | CRANKSHAFT MAIN BEARING BUSH .030" A7/A10 | £50.00 | Image |
| 68.0334 | CRANK MAIN BEARING BUSH STD 1962-65 A50/A65 | £50.00 | |
| 68.0334/10 | CRANK MAIN BEARING BUSH .010" 1962-65 A50/A65 | £50.00 | |
| 68.0334/20 | CRANK MAIN BEARING BUSH .020" 1962-65 A50/A65 | £50.00 | |
| 68.0334/30 | CRANK MAIN BEARING BUSH .030" 1962-65 A50/A65 | £50.00 | |
| 68.0657 | CRANKSHAFT MAIN BEARING BUSH STD 1966on A50/A65 | £50.00 | Image |
| 68.0657/10 | CRANKSHAFT MAIN BEARING BUSH .010" 1966on A50/A65 | £50.00 | Image |
| 68.0657/20 | CRANKSHAFT MAIN BEARING BUSH .020" 1966on A50/A65 | £50.00 | Image |
| 68.0657/30 | CRANKSHAFT MAIN BEARING BUSH .030" 1966on A50/A65 | £50.00 | Image |
| 68.0625 | CRANKSHAFT DRIVE SIDE ROLLER BEARING (CN) A50/A65 1966on | £58.00 | |
| 116-038-80E | RENOLD TRIPLEX PRIMARY CHAIN 80L A50/A65 | £65.00 | |
| 67.0356 | CAMSHAFT STANDARD A7/A10 | £80.00 | |
| 67.0357 | CAMSHAFT A10 ROCKET & SUPER ROCKET | £80.00 | |
| P.19233/20 | HEPOLITE +.020" A65 PISTONS 9:1 C.R. (PAIR) WITH RINGS & PIN etc | £88.40 | |
| P.19233/40 | HEPOLITE +.040" A65 PISTONS 9:1 C.R. (PAIR) WITH RINGS & PIN etc | £88.40 | Image |
| 71.1105/6B | A65 BILLET ALLOY CONNECTING RODS (Pair) | £350.00 | |
| 67.1205/6B | A10 LARGE JOURNAL BILLET ALLOY CONNECTING RODS (Pair) | £390.00 | |
